Condensation - Where does it come from?

Home >> Articles >> Condensation - Where does it come from?

Almost every activity that we do within the home produces water vapour. Whether it is cooking, washing or simply breathing we all add moisture to the atmosphere around us. Under normal circumstances the air within your home is able to support or absorb this moisture and hold it in suspension.

Moisture rich air circulates around the house and is changed as it travels out of windows and doors. This happens most months without any problems and you never notice any visible signs. That is until the balance shifts and gap between internal and external temperatures increases. One particular activity that likely to increase water vapour in the air is drying laundry indoors. Yes your clothes will dry quicker in the house but where does that water from your clothes go? It does not simply dry up and disappear but is absorbed into the air within the home.

When the summer months draw to a close, we start to keep the windows and doors shut for longer as the evening temperatures drop off. Our activities of cooking, washing and breathing continue unchanged but in the colder conditions and with windows closed, there are fewer air changes in the home. The air continues to circulate picking up more and more moisture as we go about our normal lives.

The amount of moisture or water vapour that can be held is increased by putting on the heating but there is still a limit to how much water the air can hold. In todays' world of high energy prices more and more of us are holding off that decision until absolutely necessary but the heating does much more than just warm us.

A good example of the air reaching saturation point is when we emerge from a bath or shower and see steam floating around in the bathroom. The air has absorbed as much as it can and you can suddenly see all this moisture before your eyes. We accept this as the norm and in most cases the water vapour will deposit itself on your mirror or tiled surfaces before clearing through into another room or out of the window.

Although not so exaggerated as in the bathroom scenario, our normal living activities produce large amounts of moisture which for certain months of the year start to manifest as condensation.

Condensation is the result of moisture saturated air coming into contact with a cold surface and then shedding its water onto that surface. Traditionally condensation would form on window frames and the glass as this would have been the point where the colder temperature of outside had the best opportunity to pass through into the warmer house.

Years on from the old metal frame windows, most modern homes now have energy efficient glass in thermally broken frames, problem solved? Unfortunately not; in fact modern construction methods actually make the incidence of condensation more likely as the airtight designs reduce the opportunity for air to flow and change within the homes. Years ago most homes had a chimney and ill-fitting windows and doors which allowed the air to flow. Condensation appeared on the windows and that was widely accepted.

Modern windows do not suffer as much from condensation but modern living and home design actually increases the moisture within the air. This is not a problem when the heating is cranked up but without it you are more likely to see mold growth in the backs of wardrobes, the hall and in bedrooms than you are condensation on your windows. Two sleeping adults produce around 1 ½ pints of moisture in 8 hours which is absorbed as water vapour into the atmosphere. If you turn your heating off at night as the temperature drops, the air cannot hold as much moisture at it will deposit that when it comes into contact with a colder surface.

A new 3 bedroom house will absorb around 1500 gallons of water during the construction, much of which is dissipated into the indoor atmosphere during the drying out period. Adding heating and carpet will help but that is still a large amount of moisture being added to the air which is likely to be seen as condensation somewhere in the property.

The architects and product manufacturers continue to try and design out condensation from our homes but our very way of life still remains the biggest problem. Cooking, showers & baths, drying clothes, better fitting windows and doors, no chimney all add to the problem and increase the risk of condensation.

Condensation is not caused by products but merely reflects the atmospheric conditions that we as occupants create. As such, we also have a responsibility to manage both the risk and the water when it does occur. Simply ignoring those beads of water on the glass in the morning will ultimately result in the discolouration of your window frames, silicone and rubbers. Ignore the water in your bathroom and the grout and silicone will go black and you may suffer from mold growth in corners and on the ceiling.

Unchecked, condensation will damage paintwork, curtains, wall coverings and fittings. Over time it will damage items beyond repair and could be costly. It is natural to regularly vacuum the carpets or dust the furniture, whereas maintaining our windows and rooflights seems less of a priority. Most view windows and skylights as unimportant or even products that do not require regular care, which is far from the truth. All products require some maintenance, particularly those in coastal or high pollution environments. Why then should it not be as natural to clear away the water from the bedroom windows in the morning or wipe down the tiles in the bathroom after use and check the walls for any spots of damp or mold each month.

Despite the introduction of modern glazing, genuine steel framed windows and Conservation rooflights will always be at risk of developing condensation particularly when used in modern buildings. The Glass & Glazing Federation produce an information booklet about causes and advice for condensation which can be viewed on our Lumen rooflight site at http://www.lumenrooflight.co.uk/assets/files/user/condensation_advice.pdf.
This guide not only explains how condensation forms but also gives practical tips about reducing the risk of it happening.

Condensation is caused by the way we live combined with a perception that modern products are somehow maintenance free. With a better understanding of how condensation comes about we can take action to reduce the possibility of it happening and care for our products when it does. Should your window or rooflight or ceiling suffer from condensation or mold growth it is most likely to be the reflection of the environment rather than any serious product failing. Clearing any moisture away from the affected area will extend the product life and stop unsightly mold patches spreading.

Lumen Rooflight
3 RMD Business Units, Holsworthy Industrial Estate
Holsworthy EX22 6HL United Kingdom
Tel: 0330 300 1090
Tel: 01409 255120

© Lumen Rooflight